http://bazaudi.com/plu/ 2026-05-13T07:52:04-07:00 http://bazaudi.com/plu/ http://bazaudi.com/plu/lib/tpl/arctic/images/favicon.ico text/html 2014-01-27T22:34:44-07:00 http://bazaudi.com/plu/doku.php?id=plu:example_config_files:ax25_down&rev=1390890884&do=diff /etc/ax25/ax25-down #!/bin/bash # Stop BBS #killall xfbbd # Stop FPAC # /usr/sbin/fpac -stop # Stop beacon if it is running if [ -e /var/run/beacon.pid ]; then killall beacon rm -f /var/run/beacon.pid echo Beacon stopped fi # Stop netromd if it is running if [ -e /var/run/netromd.pid ]; then killall netromd rm -f /var/run/netromd.pid echo Netrom Stopped fi # Stop mheardd if it is running if [ -e /var/run/mheard.pid ]; then killall mheardd rm… text/html 2014-01-17T11:14:11-07:00 http://bazaudi.com/plu/doku.php?id=plu:example_config_files:ax25_init.d&rev=1389986051&do=diff /etc/init.d/ax25 #!/bin/bash # Provided by Charles S Schuman ( K4GBB ) 04/29/09 # Edited to work with Debian Squeeze Basil Gunn (N7NIX) 02/24/2011 ### BEGIN INIT INFO # Provides: ax25 # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Def… text/html 2014-01-27T22:33:58-07:00 http://bazaudi.com/plu/doku.php?id=plu:example_config_files:ax25_up&rev=1390890838&do=diff /etc/ax25/ax25-up #!/bin/bash # PORTNAME="vhf2" SERIALPORT="/dev/ttyUSB0" CALLSIGN="N7NIX" # Set Sysctl values sysctl -w kernel.panic=30 sysctl -w kernel.panic_on_oops=30 echo "Start Port ${PORTNAME} with device ${SERIALPORT}" # Attach KISS-device /dev/ttyS0 to Port 0 /usr/local/sbin/kissattach -l ${SERIALPORT} ${PORTNAME} 44.128.1.2 >/tmp/ax25-config.tmp awk '/device/ { print $7 }' /tmp/ax25-config.tmp > /tmp/ax25-config-tmp read Device < /tmp/ax25-config-tmp # Install Parameters /usr/lo… text/html 2014-01-27T22:33:07-07:00 http://bazaudi.com/plu/doku.php?id=plu:example_config_files:axports&rev=1390890787&do=diff /etc/ax25/axports # /etc/ax25/axports # # port name....: Any meaningful combination of letters & numbers # callsign.....: Your call sign (UPPER CASE) with an SSID, none defaults to -0 # speed........: What your TNC's serial line is set for, usually 9600 # paclen.......: One frame length # window.......: Should be equal to, or less than, what's in your TNC # description..: The frequency and/or a node name, or more info about the port # # The format for this file is: # -------------------------… text/html 2014-01-25T11:55:22-07:00 http://bazaudi.com/plu/doku.php?id=plu:example_config_files:lanparms&rev=1390679722&do=diff /etc/ax25/Lanparms #!/bin/bash # Config for AX.25 protocol stack # These files live in /proc/sys/net/ax25/$DEVICE # See file /etc/ax25/ax25-up # echo 10000 > t1_timeout # (Frack) /1000 = ? Sec echo 1000 > t2_timeout # (RESPtime) /1000 = ? sec echo 300000 > t3_timeout # (Check) /6000 = ? Min echo 900000 > idle_timeout # Idle Timer /6000 = ? min echo 2 > standard_window_size # Outstanding Frames echo 6 > maximum_retry_count # Max Retrys echo 255 > maximum_packet_leng… text/html 2018-11-23T15:55:45-07:00 http://bazaudi.com/plu/doku.php?id=plu:example_config_files:systemd&rev=1543017345&do=diff Example AX.25 config files using systemd * These files are taken from a system setup with scripts found here systemd files in /etc/systemd/system * Up-to-date files can be found in nwdigitalradio/n7nix repo here ax25dev.service [Unit] Description=AX.25 device BindsTo=direwolf.service Requires=direwolf.service After=direwolf.service [Service] # Use for debug Type=oneshot ExecStart=/bin/bash -c '/etc/ax25/ax25-upd' RemainAfterExit=yes # Install KISS Parameter: P=32, W=200, TX-Delay=5…